1. Commissioning by coupling / pairing

The headset complies with the Bluetooth 4.0 standard. To transfer data wirelessly using Bluetooth technology, register your headset with Bluetooth devices that support the Hands Free Profile, the Headset Profile or the Advanced Audio Distribution Profile. To pair the headset, do the following:

• Slide the on / off slider towards the headset
• You hear the voice prompt "Power off" and the LED flashes red 3 times
• Hold down the multifunction button and pull the on / off slider slightly out of the headset.
• The LED now flashes alternately blue and red. The headset is in pairing mode

• Turn on bluetooth visibility in your mobile phone
• Activate the search for the new Bluetooth devices in the menu

• All available devices in the immediate vicinity of the cell phone are displayed
• Select "Presence" from the found Bluetooth devices to register the headset on the mobile phone.
• If necessary, enter the PIN code "0000".
• As soon as the headset is connected to the mobile phone, the LED goes out

2. Unpair the headset from the device

If you register your headset with a ninth Bluetooth device, the least used Bluetooth device will be overwritten. In order to use the first Bluetooth device again later, it must then be registered again.

3. Which devices are addressed after switching on

When switched on, the headset automatically tries to connect to the two most recently used Bluetooth devices. You can only connect a third Bluetooth device after you have switched off one of these devices.

4. Make a call with the headset

To make phone calls, proceed as follows:

To redial, do the following:

To manage multiple calls, proceed as follows:

5. Adjust the volume

You can set the playback volume separately for three different situations:

6. How do I mute the headset?